Analytical equipment:

  • GCxGC-MS/FID

  • Several GC-FIDs, GC-TCD, GC-SCD, GC-MS

  • Online-refinery gas analyzer GC-FID/TCD

  • Automatic Titrator (TAN, TBN, BrN, IV, etc.)

  • Coulometric/Volumetric Karl Fischer Titrator

  • Total Nitrogen/Sulfur/Chlorine Analyzer

  • XRF Spectrometer

  • Simulated Distillation

Scroll down for more!

Comprehensive Gas Chromatograph with MS and FID Detectors

The gas chromatograph is equipped with a flow modulator enabling comprehensive two-dimensional gas chromatography (GC×GC) using two columns (in both normal and reversed column configurations), as well as heart-cutting mode. The chromatograph allows simultaneous quantification of sample composition using an FID detector and identification of analytes using an MS detector equipped with a single quadrupole.

Instrument type: Agilent GC 8890, MSD 5977C, RFF modulator, and ChromSpace software by SepSolve.

Gas Chromatographs with Mass Spectrometer

Gas chromatographs equipped with mass spectrometric detectors for the analysis of fuel components, identification of compounds in light- and medium-boiling petroleum products, and analysis of other organic matrices.

Instrument types: Thermo FocusGC + DSQ, HP 6890N with MS (MSD 5975), HP 6890 with MS (MSD 6973)

Process Gas Chromatograph with Electrolyzer

With four independent analytical channels (two TCDs for hydrogen and permanent gases, and two FIDs for hydrocarbon analysis up to C12) and programmable heated ovens for capillary columns, the system enables accurate and rapid online analysis of volatile products from catalytic units, ranging from hydrogen to n-dodecane. Automated sampling from up to six reactors eliminates the need for time-consuming sampling into Tedlar bags, reduces measurement uncertainty, and accelerates research.

Automatic Titrator

Automatic titrators used for the determination of acid number, bromine number, iodine number, total alkalinity, and other parameters of oils.

Instrument types: Titrando 888, Titino 716, METTLER TOLEDO T50

Standards: Total acid number (ASTM D664), carbonyl content (ASTM E3146), iodine number (EN 14111), bromine number (ASTM D1159), basic nitrogen content (UOP 269), and peroxide content (ČSN EN ISO 27107).